How to Install a Security Door Handle

The anti-theft door handle, as the name suggests, is the handle installed on the anti-theft door, which can facilitate us to open and close the anti-theft door. So how to install the anti-theft door handle? Let's follow the editor to find out.

1. Installation steps of anti-theft door handle

1. Open the door so that you can operate both the inner and outer door handles at the same time. Locate the two screws on the inside door handle cover that hold the inside and outside door handles together.

2. Turn the two screws counterclockwise with a Phillips screwdriver, and pull the inner door handle away from the door and pull the outer door handle away from the door.

3. Use a Phillips head screwdriver to remove the two screws from the outer edge of the fixed latch plate door. Go out the door and pull out the latch plate assembly.

4. Use a Phillips screwdriver to counterclockwise the two fixed strike panels on the door frame, and pull and knock the door frame panel off.

5. Place the new latch plate assembly through the hole on the edge of the door, part of the curve of the latch bolt that should point to the outside of the door. The wood screws included with the latch plate door handle kit.

6. The door that entered the door is inserted from the outside with the handle of the outer door. Usually two sleeves, inside the cylinder of the latch hole, will fit. Press the door handle until the cover rests against the door.

7. Insert the inner door handle into the door from the inside of the door. Place the two fixing screws into the holes on the cover plate, turn the screw thread clockwise to the outer door pull the glove, and tighten the screws with a Phillips screwdriver.

8. On the door frame on the curved side curved around the inner side of the door frame, fix the impact plate and the screws that come with the kit.

Second, the door handle installation precautions

The handle is installed vertically on the upper corner of the door panel. This installation method is the choice of most people. The upper part of the floor cabinet door is installed with a handle, and the lower part of the wall cabinet door is installed with a handle, which can be used directly without having to adapt to the opening direction of the door panel, and there is no need to bend over when opening the floor cabinet door. It's easy to open the cabinet door.

The handle is installed horizontally on the corner of the door panel. There are many people who like to install it like this. When you first use it, you can visually see which direction the door opens, and you can operate it directly. Some people are eager to operate it when cooking, and hang the small shovel used for cooking on the side without opening the door. The door handle is on the door, and when the meal is finished, the small shovel is retracted.

The handle is installed horizontally on the corner of the door panel. It is installed in the center of the door panel. If you add the old copper-colored handle, it will give you a retro feeling, adding a sense of maturity from the pastoral style just now. The disadvantage is that in the process of use, it is not very adaptable at the beginning, because it is impossible to see the opposite door by visual inspection, which direction the door panel opens, and it will adapt to it for a period of time.

There is a centering position installed vertically on the side of the door panel to open the door. Install the handle at the top and bottom of the door panel. Few choose this installation method, because the base cabinet must bend over to hook the handle when opening the door. How many times do you have to bend your waist? There are also hanging cabinets, if you want to lift It takes only one foot to hook the handle. How many times a year do you have to lift your foot? It is several times more laborious than the previous one. The height of the handle installation is exactly the position of the adult's knee, so it is easier to hit the leg when cooking.